High Temperature RTV Silicone Gasket Maker
This product is a one component RTV silicone sealant , curing competely without excitant odour release. It
has three high resistance characteristics, oil resistance, high temperature resistance, resistance to high
pressure, Operation safty under 15MPA pressure.
Easy to use: squeeze easily at any time.
Ambient curable, apply to the engine and transmission of high performance sealing.
Excellent resistance to medium resistance aging, ultraviolet light can withstand oil, gas, water, etc.
Excellent corrosion resistance: Used in all kinds of steel and difference temperature condition.
Type: 264 N Neutral
4.Scope of application
High temperature resistant silicone sealant is designed for automobile production of bonding, sealing .
Design for single Component formula, acid&neutral Solidified into elastic rubber strip. Used for free, and
can be used in Gasket maker, internal combustion engines, Steam turbine, automobile, gear box, compressor,
household appliances. construction machinery, surface of Engineering machinery,Flange, hydraulic system,
threaded connector seal, sealing against , oil pump, water pump, oil filter bearing, the oil pan ,all is good
proof leakage Sealing function, can prolong the service life of the machine equipment.
First of all. Clean up the base material surface water, dust, grease If necessary, cleaning with solvent such
as butyl,xylene, ketones) cleaning with dishcloth wipe all the residue, make full clean, dry base material.
Interface with duct tape around to ensure that cover the surface of the seal of lines perfect . thorn aluminum
tube with the cup. If joint width is greater than 15 millimeter, need to repeated coating glue, trim the surface
of the glue with cutting tools, remove excess rubber material before peel off the tape, if there is a tear stains
it can be used wet cloth off: The surface will be dry in ten minutes after squeezing out the glue, then need to
be completely sulfide sulfide 24 hours or longer, according to the thickness of the glue and environmental
temperature, humidity based on external conditions accordingly.
Volumen (cm 3)
32 g/ blister card
50 g/ blister card
70 g/ blister card
85 g blister card
300 ml/ cartridge
The glue should be stored in cool, dry and ventilated places with cover sealed.